Liquid Rubber Pond Liner Installation Guide

 <<Back  

1. Clear the pond and surrounding area of any roots, stones or debris.

2. Lay the underlay GEOFABRIC to fit the contours of the ground and allow at least 2 inches of overlap between strips.

3. Spray the “liner” LIQUID RUBBER directly to the GEOFABRIC 2mm in thickness, this will make a seamless liner, this is carried out by Australian Waterproofing Company accredited applicators.

4. After the GEOFABRIC has been sprayed with its Liquid Rubber coating there is no need to move it the rubber has been position by Australian Waterproofing Company accredited applicators and will fit the pond area perfectly, Just let it wrinkle and pleat naturally to fit the contours of the pond.

 5. Fill the pond with water. Excess liner material can now be trimmed, but make sure you leave enough for anchoring. This is done by either backfilling an anchor trench or by adding stone edging.

<<Back